I. Product Introduction
Graphite high-temperature grease is composed of inorganic thickened synthetic oil, plus ultra-fine graphite powder, antioxidant and anticorrosive. At 300 ° C, the base oil slowly evaporates, and the graphite powder will adhere to the lubricated surface. It is used for solid lubrication of the stroke. It is specially used for heavy load and shock load, and it has the function of anticorrosion and lubrication.
1. Wide temperature resistance range, working temperature is between minus 20-1000 degrees.
2. Excellent extreme pressure anti-wear performance and adhesion, low coefficient of friction and strong bearing capacity.
3. Excellent mechanical and chemical stability, strong anti-glue ability, resistance to water vapor and weak acid and alkali corrosion.
4. Resistant to water and water, providing rust and corrosion protection under severe conditions.
Suitable for high-temperature, low-speed, heavy-load, slightly chemically corrosive, water-steam environment bearings, guide rails, turntables, gears, chains and other transmissions.
four. The main parameters
Temperature resistance range: -20—800 degrees
Color appearance: black paste
Working penetration (25 degrees, 0.1mm): 265—295
Oil separation (100 degrees, 24 hours), Wt%: 2.5
Evaporation loss (150 degrees, 1 hour), Wt%: 0.8
Water leaching test (38 degrees, 1 hour), Wt%: 2.0
Corrosion resistance (100 degrees, 24 hours, T2Cu): 1a
Four-ball extreme pressure test, N: 3500
Maximum no bite: 2200MPa
Maximum critical pressure: 5200N
Use special plastic buckets to seal the packaging.
Specification: 1 kg and 16 kg.
six. download Google
Note: Temperature, speed and working medium.