⎝⎛斗牛平台⎞⎠

Hello, welcome to the website of Nanning Shuanghu High Temperature Bearing Co., Ltd.!

  • Company Name: Nanning Shuanghu High Temperature Bearing Co., Ltd.
  • Company address: No. 1406, 14th floor, building 1, Nanji Anji Wanda Plaza, 55 Gaoxin Avenue, Nanning
  • Postal code: 530005
  • 24-hour hotline: 186-5316-4392
  • Company phone: 0771-5555242
  • Fax: 4008892163-217438
  • Email: worldtalk@vip.163.com
招商咨询 业务咨询
product search
GE6000ZZM Series 500 Degree Medium and High Speed Self Lubricating Deep Groove Ball Bearing
product details

One. Product and Technology Introduction

This series of products is a double-sealed rolling bearing with a self-lubricating stainless steel dust cover with a temperature of 500 degrees and a medium-speed and medium-speed carrier tape holder.

The so-called high-temperature self-lubricating bearings are high-temperature bearings that rely on special components inside the bearings to achieve high-temperature lubrication without relying on external lubrication.

High-temperature self-lubricating materials must have physical and chemical properties that do not change under high-temperature environments, have thermal lubrication, and do not cause "evaporation" under high-temperature environments. Solids are ideal. The most common and common task is graphite. Graphite is characterized by simple manufacturing process, high temperature and corrosion resistance, stable physical and chemical properties under high temperature environment, low cost, and good lubrication effect.

There is another process to achieve bearing self-lubrication, which is to infiltrate the relative sliding surfaces of the bearings, to achieve the purpose of oil-free self-lubrication of the relative moving surfaces of the bearings. This process can also make the bearings work in an oil-free state for a long time, with good lubrication effects Long life, suitable for high-speed operation, but this process is more complex and higher cost, and is generally used in important machinery, military, aerospace and other industries. We can supply the above two kinds of high temperature lubricating bearings.

This series of products are mainly graphite self-lubricating. It consists of an inner ring, an outer ring, a cage, steel balls, graphite blocks and a dust cover. A cage is required. The number of assembled rolling elements is greater than the maximum number that can be installed. At least two, in the space of the rolling body, assemble two graphite balls symmetrically or basically symmetrically (in the circumferential direction, keep the distance between the two graphite balls to maximize), the two graphite balls revolve with the steel balls and wear some graphite powder It enters the channel and acts as a lubricant. When the bearing stops rotating, it also stops abrasion, and the lubrication and consumption are synchronized.

The biggest weakness of high-temperature bearings is the unsatisfactory lubrication, which is always a problem. When high-temperature grease is added in time, it will dry out for a period of time. Either stop and add grease or run without lubrication. This series of products uses graphite solid lubrication, graphite will not degenerate under high temperature environment for a long time, will not be automatically lost by heat, and maintain high temperature lubrication performance, high temperature resistance, uniform lubrication, long life, and avoid using high temperature grease to evaporate in high temperature environment Grease and refill with high temperature grease.

The dust cover is made of stainless steel, no rust powder will be generated when heated, no rust powder will enter the channel to participate in abrasion, and other dust will be effectively prevented from entering the channel.

two. Features

1. With cage structure, bearing capacity is close to ordinary bearings of the same type.

2. Lubricated with solid graphite powder, no sticky matter is generated.

3. Graphite is stable, graphite powder is produced and lubricated simultaneously, and its service life is long.

4. Adopting a sealed structure to prevent dust and stickies from entering.

5. High temperature resistance, anti-glue, long life, no need to add any lubricant in the whole process of use.

6. The dust cover is made of stainless steel, and no rust powder is generated in a high temperature environment, realizing maintenance-free.

7. This bearing is suitable for high-temperature, low-speed, heavy-duty, dusty environments, and difficult to maintain grease.

three. Technical Parameters

1. Model: GE6000ZZM

2. Appearance size: same as corresponding standard bearing size

3. Size range: minimum inner diameter 1mm, maximum outer diameter 5m

4. Durable temperature resistance: 500 degrees, peak temperature resistance: 600 degrees (for 8 hours)

5. Maximum speed: 200 rpm or the linear speed of the outer diameter is not more than 100 m / min

6. Dynamic load and static load: the same as the load of the same model

7. Lubrication form: solid graphite self-lubricating

8. Structural seal: single row with cage double seal maintenance free

four. Precautions

1. The installation part is selected to be isolated from high heat and does not directly radiate the mechanical part.

2. High-temperature bearings, selected according to national standards, it is recommended to choose shaft f6, M7

3. In the process of selection, maintenance, installation and use, if you have any questions, please contact us directly.


Links: Nanning Boxin high temperature bearing Shuanghu high temperature bearing high temperature bearing Tesco
天天电玩城 七乐彩 欢乐拼三张 欢乐拼三张