One. Product and Technology Introduction
High-temperature non-standard bearings are our company's strengths and leading products. The development team can design and manufacture according to customer requirements (drawings or samples) or customers' basic requirements to ensure that they supply first-class products to customers, and specialize in production and manufacturing. Short cycle. This series of products is a non-standard bearing with a maximum temperature resistance of 1800 degrees, with a minimum inner warp of 2 mm, a maximum outer diameter of 5 meters, and a highest accuracy of P4. 1000 meters / minute or higher requirements.
High temperature non-standard bearings are divided into non-standard size, non-standard structure, non-standard performance, non-standard combination, non-standard material, and comprehensive non-standard.
The biggest difference between this series of products and general high-temperature bearings is the external dimensions, installation dimensions or internal dimensions. The bearing size is determined according to the sample drawing, or we are based on the basic requirements of customers and the design requirements of the bearing industry. The shapes vary widely, but the principle of the bearing is the same. Some have outer grooves, some have a large outer diameter, some have a small inner warp, and some have double ribs and some are slender. Despite its various sizes, it can always meet the requirements of high temperature resistance and other uses.
2. Non-standard bearing structure
The biggest difference between this series of products and general high temperature bearings is that the internal structure is different. Generally, the internal structure of high temperature bearings is divided into deep groove ball, angular contact, outer spherical surface, double row ball, double row roller, cylindrical roller, long cylindrical roller, sliding sleeve, self-aligning ball, tapered roller, thrust roller, Thrust balls, articulated bearings, etc., and non-standard structures are also very different, including non-circular deep groove ball structure, three-row ball structure, non-cylindrical roller structure, wave raceway structure, one-way structure with pawl, elliptical raceway Structure, etc.
3. Non-standard bearing performance
The biggest difference between this series of products and general high-temperature bearings is that the performance of the bearings is different. If required, resistance to damp gas, acid and alkali corrosion, ultra-low temperature, ultra-high temperature, high-voltage insulation, oil-free lubrication, swing only, magnetic isolation, superconductivity, salt spray resistance, rotation in molten salt, air tightness, dust resistance, ultra quiet , No damping, etc.
4. Combined non-standard bearings
The biggest difference between this series of products and general high-temperature bearings is that two or more structural bearings are combined to form a new type of bearing, which also has a combination function. Such as deep groove ball bearing and needle roller bearing combination, tapered roller bearing and cylindrical roller bearing combination, cylindrical roller bearing and thrust ball bearing combination, spherical ball bearing inner sleeve cylindrical roller bearing combination, articulated bearing sleeve bearing Combination, deep groove ball bearing inlaid one-way bearing combination and so on.
5. Material non-standard bearings
The biggest difference between this series of products and general high-temperature bearings is that the materials used to make the bearings are different, which results in different bearing performance. Such as bearing steel added tungsten vanadium and other alloy combination of high temperature resistant alloy steel, bearing steel added low temperature resistant element combination of low temperature resistant bearings, various types of ceramics, graphite, tungsten sulfide alloy steel, plastic, nylon, heat-resistant stainless steel and so on.
6. Comprehensive non-standard bearings
This series of products is a combination of the above-mentioned non-standard single-function non-standard bearings, and more complex high-temperature non-standard bearings.
1. The bearing has good high temperature and corrosion resistance, and can continuously and safely work in the range of minus 196 degrees to 1800 degrees.
2. The bearing has a wide range of speeds, and can be selected at low speed and medium speed to avoid ultra-high speed operation.
3. A wide range of bearing types can be manufactured into deep groove balls, plain bearings, articulated bearings, angular contact, self-aligning bearings, etc., suitable for different occasions.
4. Good corrosion resistance, can work normally in strong alkali and strong acid environment.
5. Impact resistance, anti-glue, long life, realizing maintenance-free.
three. Technical Parameters
1. Model: GP ---
2. Corrosion resistance: both corrosion resistant and non-corrosive resistant
3． Suitable bearing type: All bearings
4． Dimensions: Same as the size of the corresponding standard bearings, and also accept non-standard corrosion-resistant bearings
5. Size range: minimum inner diameter 5 mm, maximum outer diameter 5000 mm
6. Temperature resistance range: -196 --- 1800 degrees
7. Suitable speed: low, medium and high speed
8. Dynamic load and static load: same as national standard load
9. Lubrication: self-lubricating without lubricant or solid graphite
10． Structural seal: open and sealed
1. When selecting a bearing, be sure to pay attention to the conditions of use, such as temperature, speed, and degree of corrosion.
2. High temperature bearing coordination, selected according to national standards, shaft f6 is recommended
In the process of selection, maintenance, installation and use, if you have any questions, please contact us directly